To make a USB stick which can boot multiple ISOs, use Ventoy. Ventoy is an open source tool which creates a special USB stick. That stick contains an exFAT partition in which you can copy multiple ISO files and an EFI partition where Ventoy puts its bootable menu. When you boot on the Ventoy USB stick, the menu lists all the ISOs you placed in the exFat partition and you can boot any of them.

Go to the Ventoy release page to find the latest version of Ventoy.

cd ~/Downloads
wget https://github.com/ventoy/Ventoy/releases/download/v1.0.86/ventoy-1.0.86-linux.tar.gz
tar -xvzf ventoy-1.0.86-linux.tar.gz
cd ventoy-1.0.86
sudo ./VentoyGUI.x86_64

Choose the device which corresponds to your USB stick.

Press the Install button.

Once Ventoy is installed two partitions will be available on the USB stick:
1.) Ventoy - this is empty and is the majority of the free space to copy iso files to
2.) VTOYEFI - this is an EFI partition, not usually auto-mounted, which contains the Ventoy config files

The 'Ventoy' partition usually will be auto-mounted and can be used.

Copy ISO files to the stick.

Boot on the Ventoy USB stick.

The ISOs you copied should appear as bootable options.

The “VTOYEFI” partition needs to be mounted manually, e.g.:

sudo mkdir /mnt/vtoyefi
sudo mount /dev/sdb2 /mnt/vtoyefi/ -o rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,iocharset=utf8,errors=remount-ro,uhelper=udisks2 

source: https://linuxmint-user-guide.readthedocs.io/en/latest/winiso.html