Direct image of RaspiOS Lite
https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-lite.zip
RPI Imager on a debian based system:
sudo apt-get install qml-module-qtquick2 qml-module-qtquick-controls2 qml-module-qtquick-layouts qml-module-qtquick-templates2 qml-module-qtquick-window2 qml-module-qtgraphicaleffects libqt5quickcontrols2-5 libqt5quicktemplates2-5 wget https://downloads.raspberrypi.org/imager/imager_latest_amd64.deb sudo dpkg -i imager_*_amd64.deb
Flash Micro-SD card using Imager selecting ROS lite (without desktop and apps) OS, press Ctrl-Shift-X for advanced menu and configure ssh, passwords, hostname.
set static IP
sudo vi /etc/dhcpcd.conf
interface eth0 static ip_address=192.168.0.100/24 static routers=192.168.0.1 static domain_name_servers=192.168.0.1 8.8.8.8 interface wlan0 static ip_address=192.168.0.100/24 static routers=192.168.0.1 static domain_name_servers=192.168.0.1 8.8.8.8
if/when adjusting hostname in /etc/hostname, follow up and change
/etc/hosts with the new hostname as well:
127.0.0.1 newhostname
sudo apt install transmission-daemon
https://wiki.servarr.com/prowlarr/installation
cat >> ProwlarrInstall.sh << "_EOF_"
#!/bin/bash
### Description: Prowlarr Debian install
### Originally from the Radarr Community
set -euo pipefail
# Am I root?, need root!
if [ "$EUID" -ne 0 ]; then
echo "Please run as root."
exit
fi
# Const
### Update these variables as required for your specific instance
app="prowlarr" # App Name
app_uid="prowlarr" # {Update me if needed} User App will run as and the owner of it's binaries
app_guid="prowlarr" # {Update me if needed} Group App will run as.
app_port="9696" # Default App Port; Modify config.xml after install if needed
app_prereq="curl sqlite3" # Required packages
app_umask="0002" # UMask the Service will run as
app_bin=${app^} # Binary Name of the app
installdir="/opt" # {Update me if needed} Install Location
bindir="${installdir}/${app^}" # Full Path to Install Location
branch="develop" # {Update me if needed} branch to install
datadir="/var/lib/prowlarr/" # {Update me if needed} AppData directory to use
# Create User / Group as needed
if ! getent group "$app_guid" >/dev/null; then
groupadd "$app_guid"
echo "Group [$app_guid] created"
fi
if ! getent passwd "$app_uid" >/dev/null; then
useradd --system -g "$app_guid" "$app_uid"
echo "User [$app_uid] created and added to Group [$app_guid]"
else
echo "User [$app_uid] already exists"
fi
if ! getent group "$app_guid" | grep -qw "${app_uid}"; then
echo "User [$app_uid] did not exist in Group [$app_guid]"
usermod -a -G "$app_guid" "$app_uid"
echo "Added User [$app_uid] to Group [$app_guid]"
else
echo "User [$app_uid] already exists in Group [$app_guid]"
fi
# Stop the App if running
if service --status-all | grep -Fq "$app"; then
systemctl stop $app
systemctl disable $app.service
fi
# Create Appdata Directory
# AppData
mkdir -p $datadir
chown -R $app_uid:$app_uid $datadir
chmod 775 $datadir
# Download and install the App
# prerequisite packages
apt install $app_prereq
ARCH=$(dpkg --print-architecture)
# get arch
dlbase="https://$app.servarr.com/v1/update/$branch/updatefile?os=linux&runtime=netcore"
case "$ARCH" in
"amd64") DLURL="${dlbase}&arch=x64" ;;
"armhf") DLURL="${dlbase}&arch=arm" ;;
"arm64") DLURL="${dlbase}&arch=arm64" ;;
*)
echo_error "Arch not supported"
exit 1
;;
esac
echo "Downloading..."
wget --content-disposition "$DLURL"
tar -xvzf ${app^}.*.tar.gz
echo "Installation files downloaded and extracted"
# remove existing installs
echo "Removing existing installation"
rm -rf $bindir
echo "Installing..."
mv "${app^}" $installdir
chown $app_uid:$app_uid -R $bindir
rm -rf "${app^}.*.tar.gz"
# Ensure we check for an update in case user installs older version or different branch
touch $datadir/update_required
chown $app_uid:$app_guid $datadir/update_required
echo "App Installed"
# Configure Autostart
# Remove any previous app .service
echo "Removing old service file"
rm -rf /etc/systemd/system/$app.service
# Create app .service with correct user startup
echo "Creating service file"
cat <<EOF | tee /etc/systemd/system/$app.service >/dev/null
[Unit]
Description=${app^} Daemon
After=syslog.target network.target
[Service]
User=$app_uid
Group=$app_guid
UMask=$app_umask
Type=simple
ExecStart=$bindir/$app_bin -nobrowser -data=$datadir
TimeoutStopSec=20
KillMode=process
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
# Start the App
echo "Service file created. Attempting to start the app"
systemctl -q daemon-reload
systemctl enable --now -q "$app"
# Finish Update/Installation
host=$(hostname -I)
ip_local=$(grep -oP '^\S*' <<<"$host")
echo ""
echo "Install complete"
echo "Browse to http://$ip_local:$app_port for the ${app^} GUI"
# Exit
exit 0
_EOF_
chmod 755 ProwlarrInstall.sh
sudo ./ProwlarrInstall.sh
Browse to http://IP:9696 for the Prowlarr GUI
Prowlarr fetches updated index definitions automatically. However, custom definitions can be added.
Create Custom directory in either ~/.config/Prowlarr/Definitions/Custom or /var/lib/prowlarr/Definitions/Custom
Any custom yml files go in this directly and need to have appropriate permissions and ownership for the prowlarr user to read them.
Prowlarr caches the definitions, so while working with them, either wait for the cache to time out or restart Prowlarr after each change.
https://wiki.servarr.com/prowlarr/indexers
https://sonarr.tv/#downloads-v3-linux-debian
On RPI3, disable h265.x265,HEVC as RPI does not have hardware decoding for these:
settings → profiles → under release profiles click + , give it a name (no HEVC/265) and add under “must not contain” x265 h265 hevc separated by spaces and click save.
To exclude 4k/raw content, go to settings → profiles and edit the Any profile, remove all -2160p, Remux, Raw-HD and unknown entries.
https://wiki.servarr.com/radarr/installation
On RPI3, disable h265.x265,HEVC as RPI does not have hardware decoding for these:
settings → indexers → under restrictions profiles click + , add under “must not contain” x265 h265 hevc separated by spaces and click save.
To exclude 4k/raw and low quality content, go to settings → profiles and edit the Any profile, remove all -2160p, Remux, Raw-HD and BR-Disk entries as well as Telecine, Telesync, Cam, Workprint and unknown.
https://forums.raspberrypi.com/viewtopic.php?t=251645
Kodi on the Raspberry Pi 0/1/2/3 will only function if you are using the Broadcom drivers! This is the “Original non-GL desktop driver” on raspi-config, which is currently the default on the Raspbian images for the RPi 0/1/2/3. If you select the open-source OpenGL driver, it won't work!
Kodi on Raspbian requires a minimum of 160 MB of RAM dedicated to the GPU to function properly! This can be done by running “raspi-config” → “Advanced Options” → “Memory Split” → 160.
If you have a RPi 2/3, the recommended is 256 MB of RAM for the GPU.
-Kodi 18 on the Raspberry Pi 2/3 supports 10bit video files (at least h264 and h265/HEVC) but they are software decoded. The Pi 3B / 3B+ may do 720p 10bit and 1080p 10bit low bitrate only at max! For that you need at least 300MB of RAM for the GPU.
Raspbian by default, doesn't play some video codecs like VP6, VP8, MJPEG, Theora, etc, so to be able to play this codecs, you need to go to “raspi-config” → “Interfacing Options” → “Camera” → Enable,
or just add a new line in /boot/config.txt with:
start_x=1
on RPI3 add to/enable in /boot/config.txt for DRM to work:
[all] dtoverlay=vc4-kms-v3d
sudo tee -a /lib/systemd/system/kodi.service <<_EOF_ [Unit] Description = Kodi Media Center After = remote-fs.target network-online.target Wants = network-online.target [Service] User = pi Group = pi Type = simple ExecStart = /usr/bin/kodi-standalone Restart = on-abort RestartSec = 5 [Install] WantedBy = multi-user.target _EOF_
In Kodi enable remote control with user/password kodi
Transmission default login user/password transmission
http://IP:7878 radarr
http://IP:8989 sonarr
http://IP:9091 transmission (username/password: transmission)
http://IP:9696 prowlarr
http://IP:8080 kodi (username/password: kodi)