====== 3D Printer Enclosure ======

====== SLACK LACK ======

SLACK LACK - THE LACK ENCLOSURE WITH SLIDING POCKET DOORS
note: height 50cm, does not work with Ender 3 S1!
https://www.thingiverse.com/thing:3485510
https://cults3d.com/en/3d-model/tool/slack-lack-the-lack-enclosure-with-sliding-pocket-doors

Slack Lack Resized by falo2k
Remix of some parts of original Slack Lack to 53cm height (for Ender 3 S1!)
https://www.thingiverse.com/thing:4444364

Higher tolerance hinges
https://www.thingiverse.com/thing:4540443

Single piece door handles:
https://www.thingiverse.com/thing:4555401
https://www.thingiverse.com/make:849529 

Notes:
- Use the original Lack Table screws for the top Table and plastic connectors
- leg ends without holes for top, use the 2cm screws
- bottom end use 5cm screws (possibly need 7cm) 
- 5cm screws for bottom round cones to table



TUSH++ filament spool holder
https://www.thingiverse.com/thing:2451368
Needs 4 608zz/2r/2z ball bearings

Bearing cover to reduce 'wobbling'
https://www.thingiverse.com/thing:5970245

Perspex/Plexiglass/Acryl/Plasticsheets - measure twice before ordering and take door hinges into account!:
3x 3mm 523x445 Back and Side Panels
2x 3mm 523x210 Front Doors


https://usbtemp.com/


====== IKEA Lack Table ======

https://www.ikea.com/gb/en/p/lack-side-table-high-gloss-white-60193736/
https://www.ikea.com/gb/en/p/lack-side-table-black-brown-80104268/#content

====== Perspex/Acrylic-sheet/Plexiglass ======

https://www.theplasticpeople.co.uk/clear-as-glass-acrylic-perspex/
https://www.cutmyplastic.co.uk/acrylic-sheet/clear/3mm/L440-W440/
https://www.plasticsheets.com/

====== Leg Extensions ======

Lack Table Leg Extension - Join Hollow end to Solid end
https://www.printables.com/model/181031-lack-table-leg-extension-join-hollow-end-to-solid-

Leg coupler for two solid ends, by noktok: https://www.thingiverse.com/thing:2150751
Leg coupler for two hollow ends, by cfscrwed: https://www.thingiverse.com/thing:2425826


Filament Guide Slot
https://www.thingiverse.com/thing:2228361

Lack stack
Stacking adapter without plexiglass holder
https://www.thingiverse.com/thing:4762251
Alternative without screws
https://www.thingiverse.com/thing:2476441 

====== Other Enclosure sources ======

https://blog.prusa3d.com/cheap-simple-3d-printer-enclosure_7785/
https://all3dp.com/2/ikea-3d-printer-enclosure-tutorial/
https://www.lets-talk-about.tech/2020/02/3d-printing-famous-ikea-lack-enclosure.html
https://facfox.com/docs/kb/ikea-lack-3d-printer-enclosure-how-to-make-your-own
https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr
https://www.thingiverse.com/thing:3083358/comments
https://www.thingiverse.com/make:722387/comments
https://www.thingiverse.com/thing:3052378

lack enclosure for Ender3S1:
https://www.reddit.com/r/Ender3S1/comments/w10q1m/just_got_my_s1_from_amazon_prime_day_and_i_made_a/

Easylack Enclosure
https://www.thingiverse.com/thing:3293248

Slack Lack Doorstop on top for single piece handles:
https://www.thingiverse.com/thing:4607087