Differences

This shows you the differences between two versions of the page.

--- 3dprinter:klipper [2023/08/21 10:54] – Wulf Rajek
+++ 3dprinter:klipper [2023/10/22 23:45] (current) – Wulf Rajek
@@ Line 10: / Line 10: @@
 Installing Klipper and OctoPrint: The tool of our choice is [[https://github.com/th33xitus/kiauh|Klipper Installation And Update Helper (KIAUH)]], which streamlines the installation process by reducing user inputs to the bare minimum and adding a graphical interface. It also helps manage updates and removal of every component.
+In the Octoprint Settings tab, navigate to the "Behavior" sub-tab and select the "Cancel any ongoing prints but stay connected to the printer" option. Click "Save".
 [[https://github.com/Arksine/moonraker|Arksine/Moonraker]] is a Python 3 based web server that exposes APIs which client applications can use to interact with Klipper.
@@ Line 53: / Line 54: @@
 Cura plugin for improved printing of circular areas with Klipper:
 arcwelder cura plugin
+Klipper config file for the Creality Ender 3 S1:
+https://raw.githubusercontent.com/Klipper3d/klipper/master/config/printer-creality-ender3-s1-2021.cfg
+{{ :3dprinter:img20230825011004.jpg?400 |}}
+<code>
+wget https://raw.githubusercontent.com/mkuf/prind/main/docker-compose.extra.make.yaml -O docker-klipper-make.yaml
+mkdir config
+touch config/build.config
+alias make="docker compose -f docker-klipper-make.yaml run --rm make"
+make menuconfig
+make
+#make flash FLASH_DEVICE=/dev/serial/by-id/<my printer>
+# This file contains pin mappings for the stock 2021 Creality Ender 3
+# S1 & S1 Pro. To use this config, check the STM32 Chip on the
+# Mainboard, during "make menuconfig" select accordingly either the
+# STM32F103 with "28KiB bootloader" or the STM32F401 with
+# "64KiB bootloader" and serial (on USART1 PA10/PA9) for both.
+# For a direct serial connection, in "make menuconfig" select
+# "Enable extra low-level configuration options" and  Serial
+# (on USART2 PA3/PA2), which is on the 10 pin IDC cable used
+# for the LCD module as follows: 3: Tx, 4: Rx, 9: GND, 10: VCC
+# Flash this firmware by copying "out/klipper.bin" to a SD card and
+# turning on the printer with the card inserted. The filename
+# must be changed to "firmware.bin"
+# With STM32F401, you might need to put "firmware.bin" in a
+# folder on the SD card called "STM32F4_UPDATE" in order to flash.
+# See docs/Config_Reference.md for a description of parameters.
+Configuring Klipper/Moonraker
+All Runtime Configs are stored within config of this Repo.
+    Update config/printer.cfg with your Klipper config, set the serial device and make sure to not remove the existing Macros as they are required by fluidd/mainsail. See Klipper3d Docs for Reference
+    Make sure to update cors_domains and trusted_clients within moonraker.cfg to secure your moonraker api from unwanted access. See Moonraker Docs for Reference
+https://github.com/mkuf/prind#advanced-topics
+https://github.com/mkuf/prind#input-shaper-calibration
+</code>
+<code>
+mount /dev/sdc1 /mnt/usb
+cp out/klipper.bin /mnt/usb
+mkdir /mnt/usb/STM32F4_UPDATE
+cp out/klipper.bin /mnt/usb/STM32F4_UPDATE/firmware.bin
+umount /mnt/usb
+</code>
+====== Links ======
+https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3-s1-2021.cfg
+https://3dprintbeginner.com/how-to-install-klipper-on-ender-3-s1/
+https://github.com/zellneralex/klipper_config/blob/master/moonraker.conf
+https://moonraker.readthedocs.io/en/latest/configuration/
+https://plugins.octoprint.org/plugins/arc_welder/
+https://github.com/FormerLurker/ArcWelderPlugin/#arc-welder-anti-stutter
+https://github.com/mkuf/prind/blob/main/docker-compose.yaml
+https://github.com/mkuf/prind#input-shaper-calibration
+https://hub.docker.com/r/mkuf/klipper
+https://raw.githubusercontent.com/Klipper3d/klipper/master/config/printer-creality-ender3-s1-2021.cfg